In-Line Chopping Solutions

Integrate Scrap Processing into Your Existing Production Line

Manufacturing processes such as coil slitting, edge trimming, stamping, punch press operations, and tube and pipe production can generate continuous scrap that is difficult to handle, collect, and remove from the production area. SWEED in-line scrap choppers integrate with existing production equipment to chop this material at line speed into short, manageable pieces.

Processing manufacturing scrap at line speed reduces operator handling and exposure to long, sharp, potentially hot, or otherwise difficult-to-control material. Chopped scrap can be discharged and collected more efficiently, helping prevent material from accumulating around operators and production equipment while preparing it for compaction, transport, and recycling. SWEED engineers each solution around the material, line speed, available footprint, discharge requirements, and existing line configuration.

Built to Integrate, Not Interrupt

An in-line scrap chopper must match the speed and operating requirements of the production line it serves. SWEED configures each solution around your existing equipment, evaluating the scrap material, line speed, feed path, available footprint, discharge and collection method, safety needs, and control requirements. The result is an integrated system that processes and removes scrap efficiently while supporting production flow.

Talk About Your Line

In-Line Scrap Choppers by Application

SWEED in-line scrap choppers process slitter trim and edge trim, stamping and punch press scrap, and hot O.D. tube scarf at line speed as it’s being generated.

Material type, width, thickness, temperature, and line speed determine the appropriate chopper model and configuration. Based on the application, SWEED can configure the knives, infeed, discharge, and controls around the material and the requirements of the existing production line.

Slitter Line and Edge Trim

Continuous slitter trim and edge trim processing
Scrap processing matched to line speed
Automated trim scrap handling
Alternative to scrap winders and scrap ballers

Stamping & Punch Press

Continuous strip and skeleton scrap
Scrap processing matched to press speed
Integration with existing press lines
Automated scrap discharge and collection

Tube and Pipe Production

Hot O.D. tube scarf and weld bead scrap
Line-speed scarf processing
Reduced handling of hot, sharp material
Alternative to scarf winders

In-Line Equipment Catalog

Process Scrap Before it Becomes a Problem

Scrap winders and manual collection methods require operators to unload, move, and re-handle scrap, adding safety risks and taking time away from production. An in-line scrap chopper processes material at line speed as it’s generated and directs it into the designated collection system, reducing operator interaction while keeping scrap moving efficiently away from the production line and ready for compaction, transport, or recycling.

Request a Quote

Engineered Around Your Application

Selecting the right in-line scrap chopper starts with understanding the material and the production line generating it. SWEED evaluates:

Material type, coatings, and other material characteristics
Scrap width, thickness, shape, and temperature (when applicable)
Required line-speed range and operating schedule
Scrap tension, feed direction, and infeed path
Available footprint and equipment placement
Required chopped length
Discharge and collection requirements, including conveyors, containers, or hoppers
Operator access, guarding, and other safety requirements
Electrical requirements, line-speed reference signals, and control integration

These details help determine the number and placement of choppers, appropriate model, feedworks, knife configuration, discharge and collection equipment, and controls. Depending on the application, SWEED may recommend a standard machine, a modified configuration, or a fully engineered in-line system.

Designed, Manufactured, and Supported in the USA

SWEED in-line scrap choppers are designed and manufactured in Gold Hill, Oregon, and supported by a U.S.-based team. With decades of experience in industrial machinery, material handling, and scrap processing equipment, our team understands demanding production environments and the challenges of integrating equipment into existing lines. SWEED supports each project from application review and integration planning through installation, parts, and ongoing service.

Find the Right In-Line Chopper for Your Operation

Whether you’re replacing a scrap winder, reducing manual scrap handling, or automating scrap removal, the right solution starts with understanding your application. Tell us about the scrap material, its dimensions, line speed, available space, and how it is currently handled. SWEED will help determine the appropriate chopper model and configuration for your existing production line.

Discuss Your Application >